|
Products range:
Rotary models
Standard Rotary Filling - designed for low production runs or limited space requirements. Filling and sealing of cups, cartons and other preformed containers with liquid, dry or viscous products. Up to twelve (12) station rotary indexing table with various container
placement methods, filler with cut-off nozzles and bottom-up fill,
pick-and-place heat seal, lid application, and discharge mechanisms.
Individual Pocket Filler
Low to medium production rotary machines for filling and sealing cups,
cartons and other preformed containers with liquid, dry or viscous products.
Up to twelve (12) station rotary indexing table with various container
placement methods, pre-fill, main filler with cut-off nozzles and bottom-up
fill, pre-cut or roll stock heat seal, lid application, and discharge
mechanisms. Production rate can be up to 35 containers per minute, depending on the volume of the product to be filled (2oz. to 32oz.) Dual Pocket Filler
High production rotary machines for filling and sealing cups, cartons
and other preformed containers with liquid, dry or viscous products. Production rate can be up to 70 containers per minute, depending on the volume of the product to be filled (2oz. to 16oz.)
InLine Models
For applications requiring a larger number of processes (stations) we offer our InLine Filling System with single,dual, quad or eight pockets processing. These machines can accomodate any number of operations from automated denesting to pack-off systems.
Production rate can be up to 240 containers per minute, depending on the volume of the product to be filled (2oz. to 5lbs.)
Capping Machines
Capping is usually
the most difficult aspect of a packaging line for several reasons.
Sometimes the range of geometries and sizes of caps and bottles is so
wide that the capping machine components become expensive or the
platform of the machine is not suitable for all sizes in the range.
Sometimes the bottle and cap combination are not ideal with the threads
of the bottle being in conflict with the threads of the cap.
Sometimes, caps can only be placed vertically on the container which
increases the capital cost of the machinery. RotaPack
understands these issues very well and has a machine to address every
one of these capping challenges. We specialize in capping machines for
both startup companies as well as higher speed production capacity
up to 200 containers per minute.
Automatic
Inline Capping Machine
Fully automatic inline capper applies and torques caps onto
containers
-Capping speed: up to 200 cpm depending on cap size and
container configuration.
-Cap size range: up to 120 mm including child resistant caps.
-Container size range: (height) 1-1/2" to 15" (width) 1/2" to 7" in
plastic, metal, or glass.
-Stainless Steel frame & panels for cleanliness and durability.
-Control panel visually displays operating parameters and messages
-Bottle height adjustment,
-Pneumatic cap torque control for accuracy and reduction of scuffed
caps,
-On Demand Operation: Capper only operates when containers enter the
capping zone
-Cap Chute Full sensor: Sorter/elevator suspend operation when cap chute is
full.
Automatic Chuck Capping Machine
Automatic chuck capper is designed to vertically place a threaded cap
onto a rigid container and torque the cap to a specified application
torque. This machine is used for caps that can only be vertically placed
on a container. It is also used where containers that are too small or
irregularly shaped to be positively controlled by other capping methods.
The machine also solves the problem of particulation of polymer
tightening surfaces of other capping methods.
-304 stainless steel welded frame
-Clear anodized tumbled 6061 aluminum and 304 S/S constructed assembly
-Non-scuff chucks for gentle, positive grip
Conveyors and other Custom Machinery
|
